Roller skating is never out of style!
Yes, some people will always have a problem with it, and it’s for everything in the world. There will always be haters and lovers.
But if you’re the one who loves wheels on boots, you need the best roller skating bearings two support it.
No doubt, it’s all about the techniques of how you ride the thing. But the matter of the fact, the skating quality immensely depends on the small bearings.
So, if you want a fast and smooth ride, you’ve got to get the best bearings for the roller skates. It’s that simple.
And if you’re genuinely looking for that kind of ride, then you’re at the right place because I’ve got the best bearing for your roller skates.
Comparison Table Of 5 Best Roller Skate Bearings
10 Best Roller Skate Bearings Review Here
01. Rollerbones Bearings 8mm 16pk Review
Bad bearings make your ride hell. It’s like riding through mud, always getting the feeling something in your way. But with the Rollerbones bearings on the skates, it’s a smooth ride like none other.
There is no resistance at all.
Most bearings don’t last long due to the constant friction from use. Not with the Rollerbones. Thanks to its proprietary low viscosity bones speed cream, the resistance reduces way down. So, unlike other bearings, it doesn’t get ruined. It ensures low friction and provides the same smooth gliding action as if it came out of the box.
And not just that, the special cream helps it to avoid corrosion too. So, your bearings remain in top shape for years to come.
The best part of all, unlike some cheap generic bearings, is not too hard to clean. You can easily clean it and maintain it. That way, you can ensure the bearings last even longer.
So, if you’re looking for a roller skate bearing that would support your skates for years. The Rollerbones is the right pick for you without any doubt.
02. Bones Reds Bearings 16 Pack Review
- The non-contact, removable rubber shield avoids friction.
- It is fast, long-lasting, and easy to clean.
- The bearings provide greater strength and speed with its high-speed nylon ball retainers.
- The bearings come pre-lubricated with the special Bones cream.
- It comes with a lifetime warranty.
If you’ve got a noisy bearing on your roller skate, then know one thing, it is holding you back.
That’s because the balls on the bearings are getting close and causing friction. They are slowing you down.
So, you need to replace them with the best roller skating bearings like the Bones Reds.
Anyone who skates knows Bones are the best in business. And their Reds line is one of the best bearings lines out there.
So, what’s waiting for you with the Reds, you ask?
As told earlier, if your bearing balls are always in friction, then it’s slowing you down. So, to get to the peak speed on the skates, you need to keep those separated.
That’s what the Reds achieve to do with its high-speed nylon ball retainers. It keeps the balls contactless and helps them glide and reach the maximum running torque without fluctuations.
So you can enjoy the real speed with your bones roller skates bearings.
But that’s not it.
The non-contact shield lets you keep the dust out to make it ride the same way forever. And also, let the speed cream racing lubricant reach the inside of the bearings to keep it perform with ease.
So, the bearings last long.
03. TRIXES 16 x 608 RS Skateboard Bearings Review
- They've got the top of the line ABEC-9 rating.
- Versatile: suits skateboards, roller skates, and even longboards.
- The bearings have high durability thanks to its rubber sealings.
- The bearings are perfect for rolling out in all types of weather conditions.
- It supports all sizes of wheels.
- The mega 16 pack ensures bearings for all your wheels.
You want to switch it up a bit!
Get the skateboard out instead of the roller skates. No worries, I’ve got something that can help you out with both.
It’s the Trixes 16×608 R.S. skateboard bearings.
And this is one of the most versatile bearings you can find in the market. That’s because it doesn’t only cater to the skateboards and the roller skates; you can also use them on longboards. And the best part, they pair up with all sizes of wheels.
But what excites me the most is that you can use them on all kinds of weather conditions. It doesn’t matter whether if it’s raining heavily or the road is full of dust; the bearings got made to bear all weather.
If that wasn’t enough to win you over, you might love to know something more specific, like its ABEC-9 RATING. If you know your skates bearings, you would be aware of the rating system. If not, then let me explain a bit.
This rating explains the quality of tolerance and precision of the bearings. So in a way, it tells about the quality of the build itself. The higher the rating, the better. And by the way, ABEC-9 is the best you can get.
So, you’re indeed getting the best bearings for roller skates. No doubt.
04. Yellow Jacket Premium Bearing Review
You want something evermore versatile than the Trixes, then look no further – all you need exposure to the Yellow Jacket Premium life.
Yes, the legendary brand gets into the best roller skate bearings list. No surprise.
If you just think it’s only for your skates, you’ve got a huge surprise waiting for you.
It doesn’t matter what your ride is, whether a skateboard or a roller skate or anything else, the bearings is the only thing you would need.
The German knows to build things. They got their reputation for precision in building anything. What Yellow Jacket did is that it took the best of German manufacturing and gifted us this gem of bearings.
Your general bearings have the bumps and imprecision that tend to interfere with smooth riding experience. But not the case with Yellowjacket.
It uses the best quality premium steel in the world and smoothens it out in a way that it helps to glide your ride like no other bearings.
And the best thing about them is the fact; they make the ride fast. So professionals would enjoy it the same way as the everyday folks.
05. BESIY Bearings Review
In the search for the best bearings for roller skates, I found a gem from out of nowhere.
Most of the bearings in the list cost a bit. They are all quite affordable. But if you want something even cheaper without compromising the quality, then Besiy is a safe bet.
Now, being slightly on the cheaper side, there are some downfalls. For one, you will have to give it time to break in before it starts to roll out quickly.
But once it does, then it’s crazy fast. And not just for the roller skates, for everything. Yes, like the Yellow Jacket one, this one also supports several rides. So, you can get more use out of it.
The best part is that it rolls out silent. It doesn’t wobble or anything. The bearings don’t cause any friction at all. So it ensures a smooth ride.
But you’ve got to wipe it off time to time as the sealing isn’t up to the mark.
Yet, for the price, you can’t ask anything more than the BEISY. It’s a real steal of a deal.
06. 100 Pack 608-2RS Skateboard Bearing Review
- It supports radial and axial loads with single-row radial ball bearing.
- ABEC 1 precision standard for performance and precision.
- The 52100 bearing uses quality steel for the ultimate wear resistance.
- Get reduced friction, vibration, and noise with the steel cages separating the balls.
- Removable single lip contact seals.
If you never want to run out of bearings, then the 100 pack SACKORANGE bearings are too good of a deal to ignore.
You are getting 100 bearings in a single package, which is just unreal. And for such a deal, you won’t be needing to spend a lot.
Now in numbers, you’ll be getting a lot. But the quality of the bearings is slightly on the lower side.
So, these have an ABEC-1 rating. The precision build quality is good, but not up to the mark of some others.
But aside from the rating standards, these are pretty great. The single-row radial ball bearing offers excellent high speeds.
And no friction is going to slow it down as there won’t be any. Thanks to the steel cages, the balls remain apart from each other. So, not only the durability increase but also there isn’t any noise issue.
But for me, the best thing is its lip contact seals. However, you can take it off quickly. So, you can take them out, clean, and oil it without any hassle.
So, big props to Sackorange for keeping things simple.
07. Fireball Dragon Precision Bearing Review
- Endure lubricant to ensure a fast and lasting experience.
- The multi-pack Dragon comes with 16 bearings.
- It is highly versatile: anything with 608 bearings, all you need is the Dragon.
- It has dual labyrinth shields to protect it from dirt and other elements that ruin the bearings.
- The Dragon motto: install and forget as they got built to last.
Weightier grease means slower bearings. That’s what all believe. And if you’re a believer in it too, then things are about to change. All thanks to the Fireball Dragon Precision.
Race bearings are fast due to the oil. No doubt!
While most think, endure bearings to be slow with all the grease lubricant. Fireball shows that it only smoothens things out to be better. So, now you get smooth gliding with the Endure bearings just like the race ones.
But it’s not only the fluid that does the magic. There is a lot of work going on to make it fast. Just like it, Nylon ball cages that keep the balls in your bearings parted.
So, you don’t have to worry about friction.
Meanwhile, the high-grade steel on the entire thing gives it the smoothen surface lets it roll without wobbling. So, that also helps the cause in terms of speeding things up.
But don’t worry! Because Fireball worked on so much to ensure the speed, they didn’t forget to do the other bits.
Instead, they have done proper justice with high-quality sealing that keeps the dirt and other elements from getting inside the thing.
All in all, this is the ultimate multi-pack of 16, that you can’t miss.
08. TRIXES 8 Frictionless ABEC 9 Bearing Review
Not all bearings can take on the challenges the environment has to offer. The dust, the water, the mud, it’s too much for most.
Not the TRIXES.
You’ve already got a glimpse of glory with its 608RS.
But if you want a little more inexpensive TRIXES action with all its best parts, then the TRIXES 8 pack is just the right fit for your skates.
As you might remember, TRIXES aren’t standard bearings catering for a single application.
They offer a lot. Being a part of your roller skates to your small toys like fidget spinners, it does go with many things.
Unlike some other bearings, they aren’t just shielded but kept sealed. So it has its perks and downsides. For instance, slight friction might not be the best thing in case if you’re using it on the toys.
But if you’re installing them on the rides and planning to take them out, you can surely keep the dirt and grass out at the bay.
Not to mention, the ride will be the smoothest, and if you’re not ready, the skate will leave you away as it makes things that fast.
So, if you’re looking for the best roller skating bearings, it’s something to look into for sure.
09. Wellgo 608-2RS Ball Bearing Review
- It provides high durability and stability with carbon steel build.
- The single-row bearing gets double rubber sealing.
- The package includes a total of 10 bearings.
- The inner diameter is about 7mm, while the outer diameter is around 22mm with a height of 8mm.
- The applications include skateboards, inline skates, scooters, roller, etc.
Bearings wear out from time to time. It’s something that you can’t avoid. Only can prolong.
WELLGO, as its names suggest, lets its bearings go well past the typical life expectancy with its quality build.
The 608-2RS is an excellent example of what it is all about.
Its made of Carbon Steel. One of the most robust materials out there. So, it doesn’t matter how much load you put on; nothing will deform it.
It has excellent quality construction, but that’s not the essential trait—all you want to know if it rolls out well.
And let me tell you, you won’t be disappointed.
The bearings provide high rev and spinning time, so you will be flying on your roller skates, leaving your friends to dust.
And not just your roller skates, you can use it on all types of boards for use. So, it comes quite handier.
Plus, the decent seals on the things keep out the dust that can ruin the rotation power of the balls.
All in all, the bearings reign supreme, and that’s why they get an entry in the list.
There are a couple of things that make the best roller skating bearings. An expert can easily find those qualities. But for someone with no prior knowledge about the part, it’s hard to identify from the lot.
That’s where I come in with my expertise. I will provide you the basic knowledge needed to find the best tool for the most exquisite skating experience.
So, if you’re ready, let’s get this party started.
Now, this is something that can confuse you a lot. But if you know them, then finding the best bearings for roller skates get hella easier.
The problem is there is no widely used rating system. You’ve seen the ABEC, which many of the brands use. The higher the rating, the better the bearing. But many well-known brands don’t consider it to be their standard rating system.
For instance, Bones have their own Skated rating system. So, knowing all the used rating systems by brands would help you out in the big search.
The casing of the bearing spins due to one and one thing only. And that is the balls that get put inside it. As you know, depending on the bearing, there can be six or more balls inside it. It varies depending on the brand and the model.
But the most important thing that you’ve got to know what type of materials gets used to make the balls. The standard is steel balls, which ensure smooth-rolling and excellent durability.
But there are better quality balls like ceramic, which can be a little costly. So, knowing what type of ball material your bearing is using is key to finding the right thing.
The balls help to keep the casing of the bearing spinning. But due to constant contact, there is friction within the balls that slows down the spin. And after some time, the bearings balls wear out. Then the bearing of no use to you.
So, to solve this problem, the balls are retained in their personal space. And that’s why the retainer spaces get introduced.
Now, there are different types of retainer materials. And depending on the retainer material, the performance of the bearing varies.
For example, a Metal Crown retainer is excellent to achieve low to medium speed. But if you’re looking to high speed with no noise, go with the Reinforced Nylon Crown retainer.
So, knowing your retainer material is essential.
Most of the bearings sealing use rubber, and it’s the standard. The thing you should keep an eye on while searching for the best roller skate bearing is whether the sealing is a contact seal or a non-contact seal.
That’s because they have their pros and cons. If you take a contact seal bearing, they will protect you from the dust better than the non-contact sealing system. But the inner lip of the seal will drag the inner ring of your bearing, making it harder to rotate.
So, knowing what you want from the bearing, choose the type of sealing.
Also, removable sealings are great as they are easier to clean.
The Other Things:
Then there are some other factors that you need to be keeping tabs on to make the best purchase like the budget. You never want to overspend. The spending will only justify if you use bearing the perfect way.
So, depending on your use, spend money on your bearing.
Then what size of bearings you need, that’s another thing you should continuously need to be aware of while buying the item.
In the same way, you need to consider whether you want to use the bearings for more than just roller skating.
Knowing all these things before going to buy will help you make the best possible decision. And ultimately, you’ll have the best bearings for roller skates on your hand.
Frequently Asked Questions (F.A.Q)
01. How many bearings would skates need?
Each wheel requires two bearings. So, if you have a skate with four wheels, it would be 16. Do the math, and you’ll know how many you’ll require to buy.
02. What is the use of bearings?
It’s the thing that lets your wheel moves correctly on the skates. So, it does the most critical job.
03. Do I need to lubricate my bearings if it comes pre-lubricated?
The answer is yes. Because pre-lubricated doesn’t mean the bearings don’t need to be lubricated. So, from time to time, you should do it. How often if the question? Then I would say before every couple of days before use.
04. Why ceramic bearings better than steel?
Ceramic is better because they don’t rust, unlike steel.
You've come to the end of the journey.
Hopefully, by now, you've found the thing you're looking for: the best roller skating bearings.
There are some pretty good bearings out there. But keeping every budget and every type of user in mind, I've got the best bunch I've found.
However, I know some people might still having a hard time picking. In that case, just go with what your guts say. If you're not happy still, use the buying techniques mentioned to do the job yourself.
One way or another, I'm sure you will end up with some high-quality bearings for the skate.
And once you do, don't forget to let me know.